News

Difference between hot melt adhesive film and hot melt adhesive mesh film, hot melt adhesive film mainly has two forms of existence, namely, hot melt adhesive film and hot melt adhesive mesh film, its use and performance are different.
　　1、Breathability

　　Hot melt adhesive film is melted hot melt adhesive, made of paper-like type, the whole without seams, waterproof better, while the hot melt mesh film is also paper-like, but there are gaps in the middle, similar to the "silk" connection, so the hot melt mesh film has better air permeability.

　　2、Stiffness

　　Based on the above, the stiffness of the hot melt adhesive film is conceivable, after bonding its impact on the hardness of the fabric (or other materials) is very large, while the hot melt adhesive mesh film is not very tightly connected due to its impact on the fabric than the film will be slightly smaller.

　　3, the degree of weight

　　Hot melt adhesive film and mesh film production process is different, in the same size, due to the mesh film connected is not very close so that its weight will be lighter, while the hot melt adhesive film will be heavier.

　　4, the viscosity of the different

　　According to the above situation is not difficult to see, the viscosity of the film is greater than the net film, hot melt film fit more firmly, peel strength is higher, so in the case of breathability requirements are not very high, the main use of hot melt adhesive film adhesive applications, while the hand feeling and breathability requirements of the main use of hot melt net film.